Predictive Maintenance in Smart Factories: How AI and Industrial IoT Are Transforming Manufacturing
Introduction Issues with equipment in manufacturing processes can occur unexpectedly, resulting in delays to production and increased maintenance costs. Issues may start to occur with equipment, such as unusual vibrati
Introduction
Issues with equipment in manufacturing processes can occur unexpectedly, resulting in delays to production and increased maintenance costs. Issues may start to occur with equipment, such as unusual vibrations, overheating bearings, or increased energy consumption. If these issues are not noticed early enough, large disruptions to production can occur.
However, in modern manufacturing, improved methods for identifying issues with equipment are required.
By utilizing AI, IIoT, and equipment monitoring, manufacturers can improve the efficiency of maintenance by understanding equipment performance, identifying irregularities, and making informed decisions.
As technologies become more connected in factories, predictive maintenance is beginning to be adopted as a key feature in smart manufacturing.
What Is Predictive Maintenance?
Predictive maintenance uses equipment data, maintenance history, and analysis to predict when maintenance may be required for equipment.
This differs from other types of maintenance:
Reactive maintenance: Maintenance is only done when there is a breakdown in equipment.
Preventative maintenance: Maintenance follows set intervals or operating conditions.
Predictive maintenance: Equipment condition data is analyzed to detect possible problems in equipment.
For example, if a motor in an industrial environment has been running normally at a certain temperature and vibration level but begins to show increases in vibration, this could indicate a developing issue with the equipment.
Using predictive maintenance, this data can be combined with historical data for the equipment to allow maintenance staff to know if further investigation is needed.
Ultimately, maintenance decisions are made based on the actual condition of equipment.
Using AI & IIoT in Predictive Maintenance
To perform predictive maintenance, accurate data must be collected from equipment. Technologies such as AI and IIoT allow for effective data collection and analysis.
Real-time Data from Machines
Sensors in industrial equipment can give information on how the equipment is performing. Depending on the type of equipment and what needs to be monitored, data can be collected on:
Temperature
Vibration
Pressure
Energy consumption
Rotational speed
Operating time
Performance changes
This allows maintenance teams to understand how equipment is performing.
Abnormal vibrations can indicate issues with wear in bearings or imbalance. Abnormal changes in temperature may indicate too much friction or poor lubrication.
Continuous monitoring of equipment means that issues may be found that wouldn’t be seen with occasional investigations. However, to be able to get useful data from sensors, it is important to select the correct sensors and ensure data is collected accurately.
Data Analysis using AI
Once data has been gathered from equipment, effective analysis must be used.
Using AI and machine learning, patterns of abnormal performance can be found within historical and real-time data.
For example, if previous failures of equipment have been recorded, along with vibration and temperature data, a machine learning model can be trained. If patterns in current performance data match those in previous failures, the system may identify that there is a higher chance the equipment may have an issue.
Depending on what data is available and what maintenance goals are being met, various data analysis techniques can be utilized:
Anomaly Detection: identifying irregular performance
Classification models: identifying potential faults in equipment
Time series analysis: looking at trends in sensor data
Predictive models: predicting risk of failure
The accuracy of these models is dependent on the quality of data, choosing the right model, and regularly evaluating performance. Predictions made by AI should be used to complement technical decision-making, rather than replacing knowledge of maintenance staff.
Detecting Issues and Alerting Maintenance
Identifying abnormal conditions in equipment is valuable when it can be brought to the attention of the maintenance team.
If sensor data falls outside of expected conditions or irregularities have been detected by analysis, an alert can be issued.
For example, if a motor in a factory usually runs in a stable manner with little vibration but begins to display increased vibration across multiple working cycles,
The monitoring system detects this and alerts maintenance staff. Staff can then go to investigate the motor and understand what is causing it to perform abnormally. They can then decide if maintenance or replacement of components is required.
This links together data monitoring in equipment and decisions on maintenance. It also allows organizations to investigate potential issues to prevent more serious failures.
Benefits of Predictive Maintenance in Smart Factories
There are many benefits to implementing predictive maintenance in factories.
Reduce Unexpected Downtime
Unexpected equipment failure can cause disruption to production and affect delivery times.
By detecting potential issues early, manufacturers can investigate and schedule maintenance before equipment failure occurs.
Whilst it may not be possible to prevent all equipment failure, predictive maintenance can mean maintenance is more prepared and reduce avoidable disruptions.
Improve Equipment Reliability
Understanding equipment performance allows manufacturers to understand how well equipment is performing in normal conditions.
By understanding patterns of abnormality in equipment performance, maintenance requirements can be determined, and informed decisions can be made.
More Efficient Maintenance Scheduling
Maintenance scheduling based on time may not represent the true condition of individual pieces of equipment.
Using predictive maintenance means maintenance can be scheduled based on conditions of the equipment. Maintenance teams can prioritize equipment showing signs of deterioration.
This can mean maintenance resources are more efficiently managed.
Increased Insight
Using connected monitoring systems, insight can be gained on equipment reliability and performance.
By linking data to relevant platforms within production, managers can gain a better understanding of what is occurring in production and what areas need attention.
It can also allow better collaboration between maintenance, production, and engineering teams.
Potential Issues
Careful planning is required to effectively implement predictive maintenance.
Data Quality: Inaccurate or incomplete data from equipment can make analysis unreliable. It is important to have reliable data collection and relevant historical maintenance data.
Integration: Many pieces of equipment may be in use within factories, as well as different sensors, automation, and software systems. Additional integration may be required.
Knowledge: To implement predictive maintenance effectively, knowledge of industrial machines, data analysis, machine learning, automation, and systems management is required.
Cost: Sensors, connection systems, monitoring systems, and implementation may be costly to initially set up.
Security: As equipment becomes more connected, additional security considerations must be considered. Appropriate security measures should be in place to restrict access to systems, secure the network, and protect data.
Taking these factors into consideration at the planning stage can help create reliable and sustainable predictive maintenance systems.
Best Practice
Predictive maintenance does not need to be implemented across all production in one go. A plan can be put in place to make it easier to implement.
Identify critical equipment: Start with equipment that would greatly impact production, safety, or costs if a failure occurred.
Decide what to monitor: Decide what parameters to monitor for the equipment. This may include temperature, vibrations, pressure, and energy consumption.
Ensure good data quality: Gather relevant data from equipment, and have a history of maintenance carried out for the equipment.
Choose appropriate analysis: Choose what monitoring and machine learning models to use based on equipment and available data.
Integrate data: Where possible, integrate equipment data with other operation platforms.
Evaluate performance: Check regularly that alerts, accurate predictions, and maintenance results are being achieved. This can allow improvements to be made.
Train maintenance staff: Ensure staff can understand data and appropriately react to alerts.
A small pilot project can be a good starting point to determine how useful predictive maintenance is in practice, before expanding.
Role of AI in Industry
Predictive maintenance is part of wider trends towards a connected industry.
In modern factories, there is a growing need to link equipment data, production, asset tracking, and decision-making. Doing this can give a more complete understanding of processes in industry.
For example, if abnormal equipment conditions are identified from a monitoring system, and information on production is known, maintenance staff may be able to understand how critical the equipment is in production. This can help prioritize maintenance.
To learn more about the relationship between AI in industry, connected equipment, and production, organizations may want to look at OEMNex AI.
As physical AI and connections in industry evolve, manufacturers will have more opportunities to link analyses to processes. However, ensuring data quality, integration, human input, and well-defined roles will still be very important.
Conclusion
Predictive maintenance is becoming an important feature in smart factories. By utilizing AI, IIoT, and equipment monitoring, manufacturers can identify potential issues in equipment sooner, make more efficient maintenance decisions, and gain better insight into processes in industry.
To successfully implement predictive maintenance, consideration must be given to the needs of equipment, ensuring good data collection, integration of existing infrastructure, and training maintenance staff to understand and act on data.
With increasing connection within manufacturing, predictive maintenance can support organisations in making more informed, proactive and efficient maintenance decisions.
Originally published by Dev.to AI. Aggregated on AIWithGhost for educational purposes — full credit and traffic to the original publisher.