Phone Not Vibrating? A 10-Second Browser Check Tells You If the Motor Is Dead

This is a cross-post of a guide I originally published on KeyboardTester.click:
Phone Not Vibrating? Test Your Vibration Motor and Fix It.

When a phone stops vibrating, almost everyone guesses. Is it a setting? Is the motor dead? Do I need a repair? You can stop guessing in about ten seconds — and the trick is a browser API most web developers already know.

The fork: settings vs a dead motor

The Web Vibration API exposes a single function:

// A 200 ms buzz
navigator.vibrate(200);

// A pattern: vibrate 100 ms, pause 50 ms, vibrate 100 ms
navigator.vibrate([100, 50, 100]);

// Cancel any ongoing vibration
navigator.vibrate(0);

That call asks the operating system to fire the vibration motor directly, skipping your ringtone, Do Not Disturb, and per-app notification layers. So the result is clean evidence about the hardware itself:

• It buzzes → the motor physically works. Your problem is a setting (sound mode, Do Not Disturb, battery saver, or one app's notification config).
• Total silence → you are probably on the hardware path: case off, sliders up, retest, then price a repair.

I put a free, no-install tester at vibration-test.php that plays tap-to-run patterns (short pulse, one-second buzz, triple tap, SOS, heartbeat, and a custom millisecond pattern). Important honesty note: it triggers vibration; it cannot measure vibration strength — the browser has no API for that.

The platform catch every dev should know

navigator.vibrate() is Android-only in practice. Two gotchas:

• iOS Safari has never shipped it. Apple cites fingerprinting risk; MDN lists it as unsupported. So on iPhone the browser check simply cannot run — you go to Settings > Sounds & Haptics instead.
• Firefox dropped it. Firefox removed the Vibration API in 2024, so on Android use Chrome or Samsung Internet.

Worldwide that is still most phones: Android holds 69.14% of mobile OS share vs 30.79% for iOS (StatCounter, June 2026).

The Android settings ladder (when the motor works)

If the test buzzes, walk these in order: ring/vibrate mode → Do Not Disturb → "Vibrate on ring/notifications" toggles → battery saver (it throttles haptics) → per-app notification settings → the system haptic-strength slider. One of them is the culprit.

The Samsung "Never Play" haptics trap is a common one: a single toggle can silence feedback while everything else looks correct.

When it is hardware: what it actually costs

If it stays silent everywhere — no keyboard taps, no call buzz — price a fix with real numbers instead of dread:

• Software-level shop fix: $39–59 (Owl Repair, 2026)
• Android vibration motor replacement: $69–129 depending on model (Owl Repair, 2026)
• iPhone 13 Taptic Engine, Apple self-repair: $43.64 part + $49 tool rental = $92.64; $99 with AppleCare+; $449 out-of-warranty "other damage" (AppleInsider, 2022)

A vibration motor is one of the cheaper board-level repairs. Under warranty/AppleCare+/carrier protection, a short video of the silent test is unambiguous claim evidence — Owl Repair attributes roughly 60% of no-vibration phones to hardware faults.

And the "factory reset first" advice you see everywhere? Skip it. If the browser test buzzes, the hardware is fine and a reset is a waste; if it is silent, a reset will not repair a motor.

Try it

• Run the check: vibration motor test
• Full walkthrough (Android ladder + iPhone checklist + costs): Phone Not Vibrating? Test Your Vibration Motor and Fix It

If your phone's touchscreen also started misbehaving after a drop, a quick ghost touch test is worth running before you pay for anything, so one repair quote covers everything at once.