Dev.to WebDev 🛠 Dev 👁 0 📖 13 min read

I Built a 3D Globe That Shows How Empires Really Grew Across Earth

TL;DR: A 3D history globe shows empires spreading across a spinning Earth instead of cramming dates into paragraphs. The VEX History Globe lets you step through ten empires stage by stage, switch on battles and trade rou

I Built a 3D Globe That Shows How Empires Really Grew Across Earth

TL;DR: A 3D history globe shows empires spreading across a spinning Earth instead of cramming dates into paragraphs. The VEX History Globe lets you step through ten empires stage by stage, switch on battles and trade routes, and see which empires existed at the same time. Open it in a browser, pick an empire, and watch it grow. Built by one developer in London, territory outlines are simplified for learning, not academic precision.

I open a history book and read: "At its peak, the Mongol Empire stretched from the Pacific to Eastern Europe." That sentence does nothing for my brain. How far is that, really? What did "stretched" look like year by year? Did it grow slowly or explode outward?

A flat map answers some of that, but it distorts everything near the poles and freezes one moment in time. I wanted to see the whole story on a round Earth, stage by stage, with battles and capitals I could switch on when I needed them. So I built the VEX History Globe.

A laptop showing the 3d globe history map landing page with the headline 3D Simulation Platform and a space station corridor looking out at Earth

The globe runs in your browser at visionvix.world, no install needed. You pick an empire, step through its stages, and watch the outline grow or shrink on a spinning Earth. Ten empires are included: Roman, Mongol, British, Alexander, Ottoman, Han, Achaemenid Persia, Byzantine, Aztec, and Inca.

Each one has its own timeline broken into stages, and you can layer on battles, capitals, trade routes, and leaders when you want context. Territory boundaries are approximate and drawn for learning, not to settle border disputes in a thesis.

This article walks through what the globe is, how it compares with a book and a flat map, how to use it on desktop and phone, how I built it, and what it cannot do. I built it, so I list the limits.

Three ways to learn about empires

There are three common ways to learn about empires, and they do different jobs.

History book: You read the story. The shape of an empire is described in words like "stretched" or "controlled" or "extended to." Time moves in order, and detail goes as deep as you keep reading. The book sits on a shelf.

Flat map: You see one moment. The empire is drawn on a page, stretched at the poles because you cannot flatten a sphere without distortion. Time is fixed to one date per map. The map sits in an atlas.

3D history globe: You watch an empire grow. The shape is shown on a round Earth, so the poles are not stretched. Time moves in stages, and you get a timeline that covers the whole rise and fall. Battles, capitals, and trade routes are layers you switch on. The globe sits in any browser, laptop or phone.

The globe does not replace a book. It gives the story a shape, and it shows how big an empire was in a way that a paragraph cannot. A sentence says "the Roman Empire controlled the Mediterranean basin." The globe shows the basin, the sea, the desert edges, and the Rhine frontier all at once, and then steps forward to show the empire split in two.

The globe does not replace a book. It gives the story a shape, and it shows how big an empire was in a way that a paragraph cannot.

What is the VEX History Globe?

The VEX History Globe is designed and built by Julian Neagu, a solo founder in London who builds AI tools, apps, and websites under VisionVix. It is a 3D globe that runs in a web browser, made for students and anyone curious about history. It sits in a dark control room, with the Earth turning in front of you.

The History Globe at 1241 AD with the Byzantine Empire outlined in purple around the Mediterranean and the Mongol Empire outlined in orange across Central Asia, empire tabs along the top and a timeline slider with preset years at the bottom

Ten empires sit along the top as tabs: the Roman Empire, the Mongol Empire, the British Empire, the Empire of Alexander, the Ottoman Empire, the Han Dynasty, Achaemenid Persia, the Byzantine Empire, the Aztec Empire, and the Inca Empire.

Pick one and the globe turns to it, or switch to the world timeline and see several at once. The timeline spans from 800 BC to the present, with preset views for key years: 200 AD when Rome and the Han peaked, 1241 and the Mongol surge, 1519 with five empires at once, 1683 at the Ottoman maximum, and 1800 as the British rise began.

The tool includes 50 battles, 20 leaders, 10 capitals, and 6 trade routes. Each layer can be switched on or off, so you see only what you need. The six trade routes are the Silk Road, the Spice Route, the Maritime Silk Road, the Atlantic Triangle, the Trans-Saharan route, and the Viking Route. Each one has a date range next to it, so you know when it was active.

Step-by-step walkthrough

1. Open the History Globe

The visionvix.world landing page with the headline 3D Simulation Platform, a space station corridor looking out at Earth, and the green Open Simulators button

Everything starts at visionvix.world. The landing page opens on the 3D Simulation Platform hero, with the green Open Simulators button under the headline. It runs the tools right in your browser, with nothing to install. No sign-up, no download, no config file.

Press Open Simulators and you land on the Choose Your 3D World Simulator page. This page lists every ready simulator, with a green Enter Simulator button on each card. At the time of writing, it shows nine worlds, seven of them live and two coming soon. Press Enter Simulator on the History Globe card.

The Choose Your 3D World Simulator page on visionvix.world, with Worlds Ready: 9 worlds, 7 live now, and cards for History Globe, Molecule Studio, Chemistry Laboratory, Periodic Table, Solar System, World News Live and Chord Progression Generator, each with an Enter Simulator button

On a phone the steps are the same, and the cards stack in one column. The green button sits at the bottom of each card. Press it and the globe loads.

The visionvix.world landing page on a phone with the Open Simulators button, and the Choose Your 3D World Simulator page with the world cards

2. Pick an empire and watch it grow

Press a tab, here the Roman Empire, and the globe turns to it. The empire is drawn as an outline on the Earth, and a caption in large type gives the year and what happened, such as Caesar's Gallic Wars reaching the Rhine. A bar at the bottom lets you step back and forward, replay from the start, or let it play on its own.

The Roman Empire selected: the globe shows its outline around the Mediterranean at 44 BC with the stage caption, and a panel on the right with peak year, capital, territory, population, overview, key facts and notable rulers

The panel beside the globe gives the empire's era, a one-line summary, its peak year, capital, territory, and population, a short overview, key facts, and notable rulers. This is where you read the context while the globe shows the shape.

3. Step through the stages

Each empire has its own stages, so the outline changes shape as you go. Here, the Mongol Empire has reached 1221 AD and the caption says Central Asia is absorbed. A few steps later, the same empire has split and faded, so you see the whole rise and fall in one minute. The stages are not evenly spaced in time because empires do not grow at a steady rate.

The Mongol Empire exploded outward in 20 years, then fractured. The Roman Empire took centuries to peak and centuries to collapse. The globe steps match the historical rhythm, not a fixed year count.

The Mongol Empire at the 1221 AD stage, with an outline across Central Asia and the caption Central Asia is absorbed, beside the Mongol Empire panel

4. Put the empires side by side

The Simultaneous button switches from one empire at a time to a single world timeline. A slider runs from 800 BC to the present, and preset buttons jump to the years listed earlier: 200 AD, 1241, 1519, 1683, and 1800. This is the view that shows which empires overlapped in time.

You see the Han Dynasty and the Roman Empire both at their peak in 200 AD, thousands of miles apart. You see the Mongol Empire in 1241 brushing the edges of Europe while the Aztecs are building Tenochtitlan. A history book tells you the dates. The globe shows the geography and the overlap.

Simultaneous mode at 200 AD, with the Roman and Han empires outlined on the globe, the year in large type, preset buttons for 200 AD, 1241, 1519, 1683 and 1800 and a timeline slider

The side-by-side simultaneous mode reveals which empires existed at the same time, showing historical overlap that books often obscure.

5. Switch on trade routes

The Trade Routes button draws the long-distance routes, with small markers moving along them. The list names six: the Silk Road, the Spice Route, the Maritime Silk Road, the Atlantic Triangle, the Trans-Saharan route, and the Viking Route.

Each one has a date range next to it, so you do not see the Atlantic Triangle in 200 AD because it did not exist yet. The markers move to give a sense of direction and flow, not to simulate actual caravan speed.

The Trade Routes layer, with coloured lines and small ships across Africa, Asia and the Atlantic, and a list on the right naming the Silk Road, Spice Route, Maritime Silk Road, Atlantic Triangle, Trans-Saharan and Viking Route

Trade routes are one of the four layers, along with battles, capitals, and leaders. You can switch them all on at once or use them one at a time. I built the layers because cramming everything onto one view is a mess. You want to see trade routes when you are thinking about trade routes, not when you are stepping through empire stages.

6. Switch on battles

The Battles button puts dots on the globe and a list on the right, in date order, starting with Pelusium in 525 BC. There are 50 battles, and small chips filter them by empire. Pressing one opens a card with the year, the winner, the defeated side, the forces, and why it mattered.

The box at the bottom left gives a battle of the day, and pressing it opens that battle. Battles are not marked on the globe until you press the button because 50 dots clutter the view. The layer system keeps it clean.

The Battles layer, with coloured dots across Europe and the Middle East and a list on the right that starts with the Battle of Pelusium, Marathon, Thermopylae and Salamis, each with a year

7. Meet the leaders

The Leaders button lists 20 rulers, from Augustus and Julius Caesar to Genghis Khan, Kublei Khan, Suleiman the Magnificent, and Queen Victoria. Each one is tagged with their empire, and opening one shows their title, their reign, and a short note.

Leaders are not tied to a specific year on the timeline because most of them ruled for decades. The list gives context when you want to know who was in charge during a particular stage.

The Leaders layer, with a list on the right naming Augustus, Julius Caesar, Marcus Aurelius, Genghis Khan, Kublai Khan, Queen Victoria and others, each tagged with their empire

8. See the capitals

The Capitals button marks ten capital cities, including Rome, Karakorum, Babylon, Constantinople, Chang'an, Persepolis, Tenochtitlan, and Cusco, each tagged with its empire.

It is a quick way to see where each empire kept its centre. Some empires moved their capital over time. The globe shows the most significant one, not every temporary seat.

The Capitals layer, with a list on the right naming Rome, Karakorum, London, Babylon, Constantinople, Istanbul, Chang'an, Persepolis, Tenochtitlan and Cusco

9. Search, share, and use it on a phone

A search box at the top finds empires, trade routes, battles, capitals, and leaders. The Share button copies a link to the view you are looking at, so you can send someone a globe already spun to the Mongol Empire in 1241 with trade routes on.

A sound button turns on ambient audio, which starts muted. On a phone, the panel opens below the globe, and the layer buttons sit on the left. The globe spins with a swipe, and the timeline bar works with a tap.

The History Globe on a phone, with the globe and layer buttons, and the Mongol Empire panel opened below the globe

Simultaneous mode on a phone at 200 AD, and the Roman Empire panel with its stats, overview and key facts

How I built the VEX History Globe

I built the globe using three.js with the globe.gl library. Three.js is a JavaScript library for 3D graphics in the browser, and globe.gl wraps it with globe-specific helpers like plotting polygons on a sphere, drawing arcs between points, and rotating the camera. The library handles the projection math, so I did not have to convert latitude and longitude into 3D coordinates by hand.

The empire outlines are drawn as polygons. Each stage of each empire is a separate GeoJSON file with a list of coordinates that trace the border. I drew them in QGIS, a free mapping tool, using historical maps as references.

The coordinates are approximate because precise borders are a myth for most ancient empires. The Roman Empire did not have a surveyed line in the desert. It had a fuzzy zone where Roman influence faded into nothing. I drew a line that represents the general extent, accurate enough for learning but not for a dissertation.

Battles, capitals, and trade routes are stored as JSON arrays. Each battle has a name, year, location (latitude and longitude), winner, loser, forces, and significance. Each capital has a name, empire, and location.

Each trade route is an array of waypoints, and globe.gl draws an arc between them. The markers that move along the routes are animated in a loop, with a small delay between each one to give the impression of flow.

The timeline slider updates the globe state. When you move the slider, the app checks which empires existed at that year and draws their outlines. If you have trade routes on, it checks which routes were active at that year and shows only those. The preset buttons are shortcuts that set the slider to a specific year and trigger the same update.

The whole thing runs client-side. There is no backend. The GeoJSON files, JSON data, and images are served as static assets from a CDN, and the browser does the rendering. That keeps it fast and simple. No database, no API calls, no server to crash.

I built the globe because I wanted to see empires the way I think about them: as shapes that grow, shrink, and overlap. I also built it because I have a YouTube channel where I document these kinds of projects, and a 3D history globe made for a good video.

The video went up, and enough people asked for a link that I polished the tool and launched it on the VisionVix platform. You can see other simulators I built, including a 3D Chemistry Lab, at the same site.

What the globe cannot do

The globe is built for learning, not research. Here are its limits:

Borders are approximate

Empire borders are drawn as clean lines, but most empires did not have clean lines. They had frontier zones, client states, disputed regions, and areas where control was seasonal or symbolic. I drew the borders to show the general extent, not to settle disputes. If you are writing a thesis on the eastern limit of the Han Dynasty, do not cite this globe.

Not every empire is included

Ten empires are included because ten is enough to show the concept without overwhelming the interface. I picked empires that are well-known, geographically diverse, and span different eras. The list does not include every significant empire. The Umayyad Caliphate is not there. The Spanish Empire is not there. The Maurya Empire is not there. I may add more, but the current set is deliberate, not a ranking of importance.

Battles are a subset

50 battles are included, chosen because they were decisive, well-documented, or famous. The list is not exhaustive. If your favorite battle is missing, that is because I had to stop somewhere. The battles that are included have accurate dates and locations, but the "forces" numbers are approximate because ancient sources exaggerate and contradict each other.

Leaders are a highlight reel

20 leaders are listed, chosen because they are well-known or pivotal. The list is not a full roster of every ruler. It is a highlight reel. If a leader is missing, it is because I prioritized breadth over depth. Each empire gets two or three leaders, not twenty.

Trade routes are generalized

The six trade routes are drawn as single lines, but most of them were networks of routes, not one path. The Silk Road was dozens of paths that shifted over centuries. I drew one representative line because showing every variant would clutter the globe. The date ranges are approximate, marking the period when the route was most active, not the exact start and end years.

Mobile performance varies

The globe runs on phones, but performance depends on your phone. A recent iPhone or Android flagship handles it fine. An older phone may stutter when you spin the globe or switch layers. The app is optimized for desktop first, mobile second. If you have a choice, use a laptop.

FAQ

Q: Is this free?

A: Yes. Open the site, press the buttons, use the globe. No sign-up, no paywall, no trial period.

Q: Can I use this in a classroom?

A: Yes. That is why I built it. Teachers can project it on a screen or send the link to students. The share button copies a link to a specific view, so you can send students to the exact empire and year you want them to see.

Q: Can I download the data?

A: Not yet. The GeoJSON files and JSON data are not packaged for download. If enough people ask, I will consider releasing them as open data.

Q: How accurate are the borders?

A: Accurate enough for learning, not for research. I drew the borders using historical maps as references, but ancient borders were fuzzy, disputed, or seasonal. The globe shows the general extent, not a surveyed line.

Q: Can I embed this on my site?

A: Not yet. The globe is hosted on visionvix.world, and there is no embed code. If enough people ask, I will consider adding one.

Try the globe

Open visionvix.world, press Open Simulators, and choose History Globe. Pick an empire, step through its stages, switch on the layers you want, and watch the Earth turn. The globe is built to show you what a paragraph cannot: the shape of an empire, the overlap of empires, and the paths that connected them.

If you want to see how I built this or other projects, check my YouTube channel. If you want to see more simulators, go back to the main platform and try the other worlds. The globe is one of nine tools on the site, and each one solves a different problem with 3D and interaction.

Territory outlines are approximate. Leaders are a highlight reel. Battles are a subset. The globe is built for learning, and it does that job without pretending to be a thesis. Open it, spin it, and see what empires looked like when they spread across a round Earth.

📰 Read the original article on Dev.to WebDev

Originally published by Dev.to WebDev. Aggregated on AIWithGhost for educational purposes — full credit and traffic to the original publisher.