Dev.to WebDev 🛠 Dev 👁 0 📖 1 min read

How to Trim Audio for a Sorrel Hollow Video — Free, in Your Browser

Sorrel Hollow footage has a particular rhythm: slow water, soft light, long pauses between bird calls. The music under it should follow the same rhythm, and that usually means cutting a full song down to one quiet minute

Sorrel Hollow footage has a particular rhythm: slow water, soft light, long pauses between bird calls. The music under it should follow the same rhythm, and that usually means cutting a full song down to one quiet minute. Here is a quick way to do it without installing anything, using AudioCutter.

  1. Pick your minute first

Before you touch the audio, watch the video once and note the exact stretch the music needs to cover. For Sorrel Hollow clips that is usually 45 to 75 seconds: long enough to settle in, short enough that the scene never drags. Write down the start and end times from the song so you are cutting with a plan, not guessing on the waveform.

  1. Cut on the waveform

Open AudioCutter and drop in your track. Drag the handles to your planned start and end points, then listen to the first two seconds and the last two seconds. If the cut lands mid-word or mid-note, nudge the handle a fraction until the edge sounds clean. Add a short fade-in and fade-out so the music breathes in and out of the scene instead of switching on and off.

  1. Fade, export, and check

Export as MP3 and lay the clip under your video. Watch it once from start to finish: the music should end just as the last shot fades, not before and not after. If it is off by a few seconds, trim again — your original file is untouched, so nothing is lost by trying a second cut.

The whole job takes a few minutes and costs nothing. Try it at https://audiocutter.me/ — open the page, drop in a track, and trim your Sorrel Hollow soundtrack today.

Disclosure: I built AudioCutter, a free browser-based audio cutter, and I use it for my own video projects. I wrote this guide because trimming a song to fit a quiet video is the job I built it for.

📰 Read the original article on Dev.to WebDev

Originally published by Dev.to WebDev. Aggregated on AIWithGhost for educational purposes — full credit and traffic to the original publisher.